Updated November 2026
A beer brewing kit from Northern Brewer gives you everything needed to make a full batch of beer at home, from malt and hops to yeast and bottling supplies. This guide walks you through the process from start to finish, so you know what to expect on brew day and how to get a drinkable beer out of your first attempt. Expect a brew day of roughly four to six hours, plus two to three weeks of fermenting and conditioning.
What Comes in a Northern Brewer Kit
Most kits from Northern Brewer include malt extract or grain, hop packets, a yeast pack, and a recipe card with timing and temperature notes. Check the contents against the packing list before you start, because a missing yeast packet or hop addition will change the final beer. Many kits also include priming sugar for bottling, but you may need to supply your own bottles, caps and a capper.
Shopping for one? See our guide: 6 Best Craft Beer and Brewing Kits and Books for Home Brewers (2026).
Gather Your Equipment Before Brew Day
A kit only works if you have the basic equipment on hand. Set up everything the night before so you are not hunting for a thermometer while the wort is boiling.
- A brew kettle with at least 5 gallons of capacity
- A 6.5 to 7.5 gallon fermenter with an airlock and drilled stopper
- A sanitizer such as star san or iodophor, plus a spray bottle
- A sanitized spoon, funnel and siphon hose
- A digital thermometer and a hydrometer for gravity readings
- Bottles, caps and a capper, or a keg and gas setup if you plan to keg
The Brew Day Process, Step by Step
Sanitize Everything That Touches the Beer
Sanitation is the single step that most often decides whether a batch turns out clean. Soak or spray every item that will contact cooled wort, including the fermenter lid, airlock, spoon and funnel. Rinse nothing after sanitizing unless the product label says to, because a rinse can reintroduce bacteria.
Steep, Boil and Add Hops on Schedule
Bring your water to the temperature listed on the recipe card, then steep any specialty grains in a grain bag for the time given, usually 20 to 30 minutes at around 150 to 160°F. Remove the grains, add the malt extract, and bring the wort to a full boil. Add hops at the times printed on the card. Bittering hops usually go in at the start of the boil, while aroma hops go in during the final 5 to 15 minutes.
Cool, Transfer and Pitch the Yeast
Cool the wort to around 65 to 70°F as quickly as you can, using an ice bath or wort chiller. Strain it into the sanitized fermenter, top up with cool water to your target volume, and check the temperature before adding yeast. Pitch the yeast once the wort is at the correct temperature for the strain listed on your pack. Seal the fermenter, fill the airlock, and set it somewhere stable.
Ferment, Check Gravity and Bottle
Most ales ferment actively for 5 to 10 days, and then need another week or two to clear and settle. Take a gravity reading with a hydrometer before bottling, and only bottle once the reading is steady across two days. Dissolve the priming sugar in boiled water, add it to the bottling bucket, siphon the beer in, and fill bottles leaving about an inch of headspace. Cap them and store at room temperature for about two weeks before chilling.
Common Mistakes to Avoid
- Skipping sanitation or using dish soap instead of a brewing sanitizer
- Pitching yeast into wort that is still hot, which can kill the culture
- Bottling before fermentation has finished, which risks bottle bombs
- Opening the fermenter repeatedly, which invites contamination and temperature swings
- Rushing the conditioning period, which leaves the beer green and harsh
Recommended Gear
A sturdy fermenter with a reliable airlock is worth the investment, since it protects your beer through the entire fermentation period. View on Amazon
A digital thermometer makes it much easier to hit the yeast’s temperature range consistently. View on Amazon
A hydrometer lets you track fermentation progress and confirm the beer is ready to bottle. View on Amazon
FAQ
How long does a Northern Brewer kit take from start to finish?
Brew day usually takes four to six hours, and fermentation plus conditioning typically adds two to three weeks. Plan for a few extra days if the beer has not reached a stable gravity reading.
Do I need all-grain equipment to use a beer brewing kit?
No. Most kits use malt extract, which needs only a basic kettle and fermenter. All-grain brewing requires a mash tun and more equipment, and is a separate step many brewers take later.
What should I do if fermentation seems stalled?
Check that the fermentation temperature is within the yeast’s range and wait at least a few more days before deciding. If the gravity is still high and nothing has changed, a fresh yeast pitch may help, and a local homebrew shop or club can give hands-on advice.
Conclusion
A Northern Brewer kit gives you a clear path to your first batch, as long as you prepare your equipment, sanitize carefully, and follow the timing on the recipe card. Keep notes on each brew so you can compare results and adjust next time. Once you have a batch or two under your belt, a guide like Recipe for Brewing Beer: A Step-by-Step Guide for Home Brewers can help you plan your own recipes.
