Updated November 2026

To clean kegerator beer lines, you disconnect the keg, circulate a dedicated beer line cleaner through the system, rinse thoroughly with clean water, and sanitize the lines before reconnecting. Done every two weeks or so, this routine removes the beer stone and yeast that build up inside the tubing and keeps your pours tasting clean instead of stale or sour. The whole job takes about 30 to 45 minutes with basic gear.

Why Kegerator Lines Need Regular Cleaning

Every pour leaves a thin film of beer, yeast and protein on the inside of the tubing. Over time that film dries into beer stone, a crust that harbors bacteria and wild yeast. Owners often report off flavors, a slimy feel in the first pour of the day, and foam problems when lines are neglected. Regular cleaning is the simplest fix for all three.

Shopping for one? See our guide: 7 Best Beer Lines for Kegerator Setups Compared (2026).

How to Clean Beer Lines on a Kegerator, Step by Step

Start by closing the CO2 regulator and disconnecting the keg coupler. Keep the beer line and faucet connected so you can clean the full run. Mix your cleaner according to the manufacturer’s directions, usually in warm water, and fill a clean cleaning vessel or a cleaning bottle that fits your coupler.

  1. Attach the cleaning vessel to the keg coupler, then reattach the coupler to the keg post.
  2. Open the faucet and pump the cleaner through the line until it flows out the tap.
  3. Close the faucet and let the cleaner soak in the lines for the time the manufacturer recommends, often 15 to 30 minutes.
  4. Empty the vessel, refill it with clean water, and flush the lines until no cleaner taste or color remains.
  5. Sanitize with a no-rinse sanitizer if your product calls for it, then flush once more before pouring.

Cleaning the Faucet and Coupler

Do not forget the faucet. Pull the faucet shank apart if your model allows it, and scrub the inside with a long brush. Wipe the coupler and the drip tray too, since these areas collect the most residue and are easy to overlook. If you want more background, see How to Deep Clean Your Gas Grill’s Burners and Grates.

Tools and Supplies You Will Need

  • Beer line cleaner made for draft systems (avoid household bleach)
  • Cleaning vessel or cleaning bottle that fits your coupler
  • Hand pump or CO2 setup for pushing cleaner through the lines
  • Long line brush and faucet brush
  • No-rinse sanitizer
  • Clean water and a bucket

How Often Should You Clean the Lines?

Most home bars clean lines every two weeks, and more often if you pour lightly or use a lot of dark or hoppy beer. Lines that sit unused for a week or more also deserve a quick flush before serving. Keeping a simple log on the kegerator door helps you stay on schedule.

Common Mistakes to Avoid

  • Using bleach or harsh household cleaners, which can damage tubing and leave residue.
  • Skipping the final rinse, which leaves a cleaner taste in the first pours.
  • Letting the cleaner sit too long or too short; follow the stated soak time.
  • Forgetting the faucet and coupler, where much of the buildup hides.
  • Reconnecting the keg before the lines are fully flushed.
  • Beer line cleaner for draft systems: a purpose-made cleaner dissolves beer stone better than generic products. View on Amazon
  • Long beer line brush: it reaches the full length of the tubing so you can scrub away film that flushing alone leaves behind. View on Amazon
  • No-rinse sanitizer: it sanitizes the lines before you reconnect the keg without adding a rinse step. View on Amazon

For more on choosing supplies, see 6 Best Kegerator Line Cleaning Kits for Home Bars (2026) and 5 Best Beer Line Cleaners for Kegerator Setups Compared (2026). If your beer keeps foaming after cleaning, Foaming Beer from Kegerator? 6 Best Fixes and Parts to Stop It (2026) covers the other common causes.

FAQ

How long does it take to clean kegerator beer lines?

A full cleaning and sanitizing cycle usually takes 30 to 45 minutes, including soak time. Most of that time is waiting while the cleaner works.

Can I use bleach to clean beer lines?

It is better to avoid bleach. Purpose-made beer line cleaners are designed for draft tubing and leave fewer residues that can affect flavor. For another angle, check out 5 Best Replace Beer Line Kegerator Options for Home Bars (2026).

Do I need to clean beer lines if I drink slowly?

Yes. Yeast and beer stone build up even with light use, so a regular schedule of roughly every two weeks is still worthwhile.

Conclusion

Cleaning kegerator beer lines every two weeks keeps your pours fresh and prevents the slow buildup of beer stone. With a cleaner, a brush, a sanitizer and about 45 minutes, you can handle the job at home. Make it part of your routine and your beer will taste the way it should.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our home brewing guides, checking product details against manufacturer specifications and owner feedback.