Updated November 2026

A mr beer wine making kit is a compact, beginner-friendly way to turn a can of wine concentrate into a finished bottle of wine in a few weeks. In this guide you will learn what the kit contains, how to sanitize and mix the batch, how to manage fermentation and clearing, and how to bottle your wine without oxidizing it. The method below follows the general process used with most concentrate-based kits, so you can apply it to similar products too.

What Comes in a Mr Beer Wine Making Kit

Mr. Beer is best known for its homebrew beer kits, and the wine-oriented offerings follow a similar idea: a concentrated base, a yeast packet, and a few additives packaged for one batch. Contents vary by product and by season, so check the label on your specific kit. Most wine kits include the following:

Shopping for one? See our guide: Red Wine Vinegar Making Kit vs Crock Method: Which Is Better for Beginners?.

  • A can or pouch of wine concentrate (juice concentrate, sometimes with added flavoring)
  • A packet of wine yeast, usually a dry strain
  • Finings or clarifier, often labeled as Sparkolloid or a similar product
  • Potassium sorbate or another stabilizer, if the instructions call for backsweetening
  • Sometimes a sugar or dextrose packet to raise the starting gravity

Read the included instructions before you start. Manufacturers specify exact volumes, water temperatures and timing for each product, and those numbers override any general guidance here.

Equipment You Need Before You Start

A kit gives you ingredients, not equipment. Most home winemakers assemble a small set of tools once and reuse them for every batch. A typical setup includes:

  1. A food-safe fermenting bucket with a lid, usually 6 to 7 gallons for a 5-gallon batch
  2. A fermentation lock (airlock) and a drilled or grommeted stopper to fit your bucket or carboy
  3. A large spoon or paddle for stirring, made of plastic or stainless steel
  4. A hydrometer and test jar for checking specific gravity
  5. A siphon hose and racking cane for moving wine off the sediment
  6. Bottles, corks or caps, and a corker if you use corks
  7. A no-rinse sanitizer such as a starsan-type product or a potassium metabisulfite solution
  8. A thermometer that reads the range of your fermentation temperature

Step-by-Step: Making Your First Batch

Step 1: Sanitize Everything That Touches the Wine

Sanitation is the step beginners most often rush, and it is the one that most often ruins a batch. Mix sanitizer at the strength the label specifies, then soak or spray the fermenter, lid, spoon, airlock, hydrometer tube, siphon hose and any other tools. Let them drip dry or wipe them with sanitized cloth. Do not rinse with tap water after sanitizing, since that can reintroduce microbes. Keep your hands clean and avoid setting sanitized items on unclean surfaces.

Step 2: Mix the Must

Fill your fermenter with the amount of water the instructions specify, usually somewhere near five gallons. Heat a portion of the water if the directions call for warm water to dissolve the concentrate more easily. Add the concentrate and any sugar, stirring until everything dissolves completely. Top up with cold water to the final volume marked on your bucket. Stir vigorously to add oxygen, since yeast needs it in the early stage.

Step 3: Take a Gravity Reading

Before adding yeast, pour a sample into your test jar and float the hydrometer. Record the reading as your original gravity (OG). Kit instructions usually state a target range. If your reading is far outside it, you may need to adjust sugar or water. Write the number down. You will compare it to your final gravity later to estimate alcohol content.

Step 4: Pitch the Yeast and Start Fermentation

Sprinkle the yeast over the surface of the must or rehydrate it if the packet says to. Put the lid on, fit the airlock with water or sanitizer to the fill line, and place the fermenter somewhere that stays within the temperature range on the package. Most wine yeasts prefer a steady, moderate temperature. Keep the fermenter out of direct sunlight and away from heat sources.

Step 5: Monitor Primary Fermentation

Expect visible activity within 24 to 48 hours in most cases: bubbles in the airlock, foam on the surface, and a faint sweet-sour smell. Primary fermentation usually lasts one to two weeks, though timing depends on temperature and yeast. Check the hydrometer over several days. When the reading stops dropping across two or three checks, fermentation is essentially complete.

Step 6: Rack Off the Sediment

Once fermentation settles, siphon the wine into a clean, sanitized secondary vessel, leaving the lees (sediment) behind. This step, called racking, clears the wine and reduces off-flavors. Keep the siphon tube below the surface of the wine as you move it, and avoid splashing, which introduces oxygen.

Step 7: Clear and Stabilize

Add finings according to the package directions. Clearing agents typically need several days to a couple of weeks to drop sediment. If your kit includes a stabilizer and you plan to sweeten the wine, add the stabilizer first, wait the recommended interval, then sweeten. Adding sweetener to an unstabilized wine can restart fermentation in the bottle, which can cause corks to pop or bottles to burst.

Step 8: Bottle Your Wine

Sanitize your bottles and siphon the wine into them, leaving about an inch of headspace. Cork or cap them, then store the bottles upright for a few days before laying them on their side. Give the wine time to age. Many kit wines taste better after a few months than right after bottling, though the exact timing varies by style.

Timeline Overview

Stage Typical Duration What to Watch For
Sanitizing and mixing One session Full dissolution of concentrate
Primary fermentation 1 to 2 weeks Airlock activity, stable gravity
Racking and clearing 1 to 3 weeks Visible sediment dropping, clear wine
Bottle conditioning 2 weeks to several months Flavor smoothing over time

Timing ranges are general. Follow the kit’s own instructions for the exact schedule.

Common Mistakes

  • Skipping sanitation. Even small contamination can produce vinegar, sour off-flavors or cloudy wine.
  • Fermenting too warm. High temperatures can produce harsh, solvent-like flavors.
  • Bottling before the wine is stable. Residual sugar plus active yeast can build pressure in sealed bottles.
  • Racking too early or too late. Early racking can leave yeast in suspension; late racking can introduce off-flavors from sitting on lees.
  • Ignoring the hydrometer. Bottling on a timer instead of a stable gravity reading is a common cause of cloudy or fizzy batches.
  • Splashing during transfers. Oxygen exposure after fermentation can dull aroma and flavor.

Tips for Better Results

  • Write down every reading and date. A simple log makes it easier to spot problems early.
  • Keep a second batch of sanitizer ready so you can re-sanitize tools mid-process without delay.
  • Label bottles with the batch name and bottling date. Kit wines are easy to confuse once they age.
  • If you want to see how other beginner routines compare, the article Starter Wine Making Kit: A Step-by-Step Guide for Beginners walks through a similar process with different equipment assumptions.
  • Compare the general approach with Making Wine From a Kit: A Step-by-Step Guide for Beginners to see which steps are universal and which depend on the specific product.

A few inexpensive tools make a noticeable difference in consistency and cleanliness.

  • Hydrometer and test jar. Without a gravity reading you are guessing when fermentation is finished. View on Amazon
  • Auto-siphon. A self-starting siphon reduces splashing and speeds up racking. View on Amazon
  • No-rinse sanitizer. Sanitizer that does not need rinsing lowers the risk of recontamination after cleaning. View on Amazon
  • Airlock and drilled stopper set. A proper seal protects the wine from oxygen and wild microbes during fermentation. View on Amazon

FAQ

Do I need to use the yeast that comes with the kit?

Usually yes, since kits are formulated around a specific yeast. Substituting another strain can change flavor and fermentation speed, so only swap if you understand the difference.

How long should I wait before drinking my wine?

Many kit wines are drinkable within a few weeks of bottling but taste smoother after a few months. Check the instructions for a recommended aging window.

Why is my wine cloudy?

Cloudiness usually comes from incomplete clearing, too early bottling, or yeast still in suspension. Allow more time for finings to work and make sure fermentation has finished before bottling.

Can I make the wine sweeter?

Yes, but only after the wine is stabilized. Add a stabilizer first, wait the recommended interval, then add sugar or sweetener to taste.

What temperature should I ferment at?

Use the range printed on the package. Most wine yeasts perform best at moderate, steady temperatures. Large swings can stress yeast and produce off-flavors.

How do I know when fermentation is finished?

Take hydrometer readings over several days. When the gravity stays the same across two or three checks, fermentation is complete.

Is homemade wine safe to drink?

Properly sanitized, fermented and bottled wine is generally safe. If a batch smells strongly of vinegar, shows mold, or has unexpected pressure, discard it. If you have questions about alcohol safety or home fermentation practices, consult a qualified professional.

Where can I learn more about kit-based winemaking?

Read manufacturer instructions carefully and explore related guides on this site, such as Wine Making Home Kit: A Step-by-Step Guide for Beginners, for broader context on equipment and process.

Conclusion

A mr beer wine making kit gives beginners a manageable route into home winemaking: a defined ingredient list, a clear process, and a finished product in a few weeks. Success depends mostly on careful sanitation, steady temperatures, and patience during clearing and aging. Keep a log, trust your hydrometer more than the calendar, and your first batch will be a solid foundation for the next.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our home brewing guides, checking product details against manufacturer specifications and owner feedback.