Updated November 2026
A beverage air 2-tap kegerator is the better pick if you want to pour two styles at once or host regular gatherings, while a single-tap unit suits anyone who drinks one beer at a time and wants a smaller footprint. The difference comes down to tap count, the number of kegs the cabinet can hold, and how much counter or garage space you have to spare. Below, the two setups are compared side by side so you can match the cabinet to your habits.
| Criteria | 2-Tap Kegerator | Single-Tap Kegerator |
|---|---|---|
| Taps | Two independent faucets | One faucet |
| Keg capacity | Two standard kegs (cabinet dependent) | One standard keg |
| Footprint | Wider cabinet, more floor space | Compact, fits under a counter |
| Gas and line setup | Two regulators or a manifold, two runs of line | One regulator, one line |
| Best for | Mixed styles, frequent guests | Solo drinkers, tight spaces |
Pour Capacity and Variety
The biggest advantage of a 2-tap setup is running two beers, such as a lager and a stout, without draining one keg to get to the other. Each faucet pulls from its own keg, so you can serve a light beer to one guest and a hoppy ale to another at the same time. Winner: 2-tap, especially if you brew several styles or entertain often.
Space and Installation Footprint
A single-tap cabinet is narrower and easier to tuck into a kitchen corner, basement nook, or garage wall. A 2-tap unit needs more width and usually more clearance for airflow and the second keg. Winner: single-tap for tight layouts.
Gas Setup and Maintenance
Each additional tap adds a line, a faucet, and a cleaning task. With two kegs you will also manage two pressure settings if they carry different beers, which means a little more calibration when you start out. Single-tap systems are simpler to set and troubleshoot. Winner: single-tap for beginners who want fewer moving parts.
Cost of Ownership Over Time
Owners who serve two styles often find the extra tap pays off in fewer trips to the homebrew shop, since both kegs can be filled on the same schedule. Single-tap owners need to refill or swap kegs more often if they pour steadily. Winner: 2-tap for households that drink a lot of beer across different styles.
Pros & Cons
Beverage Air 2-Tap Kegerator
- Pro: Serves two beer styles at once.
- Pro: Fewer keg swaps for groups.
- Con: Wider footprint and more setup to balance.
Single-Tap Kegerator
- Pro: Compact and simple to install.
- Pro: Fewer lines and faucets to clean.
- Con: Limited to one beer at a time.
Which Should You Choose?
Match the cabinet to how you actually drink and where it will sit.
- Choose a 2-tap model if you host often, brew or buy more than one style, or want guests to have a choice without waiting for a keg swap. Check current listings: View on Amazon
- Choose a single-tap model if you drink mostly one beer, have limited space, or are setting up your first kegerator and want the simplest system. Check current listings: View on Amazon
If you are still getting comfortable with the basics, read Setting Up a Kegerator: A Step-by-Step Guide for Beginners before choosing a model. For tap-specific options, see Dual Tap for Kegerator: 6 Best Picks for Home Bars (2026) and Arctic King Single Tap Kegerator: Setup, Tips and Buyer's Guide.
FAQ
Can a 2-tap kegerator run two different beer styles at once?
Yes. Each tap draws from its own keg, so you can pour a lager and a stout simultaneously, provided each keg has its own regulator setting matched to the beer’s carbonation level.
Is a single-tap kegerator enough for a home bar?
For one person or a couple who drink one beer at a time, usually yes. Hosts who pour for groups may find they run out of variety or need to swap kegs more often.
How do I keep foam under control on either model?
Check line length, temperature, and gas pressure first, since these cause most foaming issues. For a step-by-step troubleshooting guide, see Too Much Foam in Kegerator: 6 Causes and Fixes That Work.
Conclusion
A beverage air 2-tap kegerator is the stronger choice for variety and entertaining, while a single-tap model wins on footprint and simplicity. Decide based on how many beers you pour at once and how much space you have. Either way, follow the manufacturer’s installation and gas specifications before serving.
