Updated November 2026
To get a CO2 tank filled for your kegerator, you can visit a beverage gas supplier, a welding or industrial gas shop, a homebrew shop that offers refills, or a exchange service that swaps your empty for a full one. This guide covers each option, what to bring, and what to check before you hand over your cylinder, so you leave with a full tank and no surprises.
Step 1: Identify Your Tank and Its Fill Requirements
Before you call anyone, read the label on your tank. Look for the gas type (it should say CO2 or carbon dioxide), the cylinder size (5 lb and 10 lb are the sizes most home kegerators use), and the date of the last hydrostatic test, usually stamped on the shoulder. Most US fill shops will not refill a tank whose test date is older than about five years, so check this first.
Shopping for one? See our guide: Where to Fill CO2 Tanks for Kegerator: 6 Best Refill Options (2026).
Also note whether the valve has a standard CGA-320 outlet, which is the fitting nearly all US CO2 regulators use.
Step 2: Choose Where to Get the Fill
Each source has trade-offs in convenience, cost of service and how much you need to explain about your use.
- Beverage gas suppliers: Companies that serve bars and restaurants often fill home-sized cylinders. Call ahead and ask whether they fill customer-owned tanks.
- Welding and industrial gas shops: Many will fill CO2 cylinders, though some only fill tanks they own. Ask about food-grade CO2 specifically, since welding-grade gas is not intended for beverages.
- Homebrew shops: Some local shops offer refills or can point you to a reliable nearby supplier.
- Exchange programs: Some retailers and suppliers swap your empty tank for a pre-filled one. This is quick, but you give up your own cylinder and may pay a higher per-swap rate.
- Fire departments or hardware stores: Not a standard option, so do not count on them.
Step 3: Confirm Food-Grade CO2 and Fill Terms
When you call, ask four questions: Do you fill food-grade CO2? Do you fill customer-owned cylinders? What is the test date requirement? And do you fill by weight or by pressure? Filling by weight is the most accurate way to know how much gas you have. A pressure-only fill can leave you guessing.
Keep your receipt and note the fill date so you can estimate when you will need the next refill.
Step 4: Prepare Your Tank for Transport
Cylinders must stay upright and secured during transport. A simple strap or a crate in the back of a car works. Do not lay the tank on its side, and do not leave it in a hot car. Close the valve fully before you carry it, and keep the valve cap on.
Common mistakes to avoid
- Bringing a tank with an expired hydrostatic test date, which many shops will refuse.
- Using welding-grade CO2 in a beverage system, which can introduce off-flavors or contaminants.
- Assuming an exchange tank is the same size as yours. Confirm the capacity before you swap.
- Skipping a leak check after reconnecting the regulator. Use a spray bottle of soapy water on the fittings.
- Filling your tank without knowing how much gas is in it, which leads to running out mid-party.
Recommended gear
A regulator with a gauge that shows both cylinder pressure and keg pressure makes it easier to spot a low tank before it runs empty. Search for a View on Amazon.
A small cylinder cart or strap set keeps your tank upright in the car and in the kegerator area. Look for View on Amazon.
FAQ
Can I refill my CO2 tank myself at home?
No. Filling CO2 cylinders requires specialized equipment and training, and home filling creates real safety risks. Use a licensed fill shop or supplier instead.
How often do CO2 tanks need to be retested?
In the US, most CO2 cylinders require a hydrostatic test every five years. Check the stamped date on the shoulder of your tank and plan ahead if it is close.
Is it safe to store a CO2 tank inside the house?
Store cylinders upright, secured, and away from heat sources. Good ventilation matters because CO2 can displace oxygen in enclosed spaces. For specific safety questions, consult your gas supplier or a qualified professional.
Conclusion
The best place to get your CO2 tank filled depends on what is nearby and whether you want to keep your own cylinder. Confirm food-grade gas, check the test date, and ask for a weight-based fill when you can. A few minutes of preparation will save you a trip back.
