Updated November 2026
Edgestar kegerators with a standard built-in thermostat are the simplest choice for a single keg of lager or ale at a stable room temperature. If you bottle, ferment in a closet with swings, or want to serve several beer styles at different pressures, an external temperature controller paired with an Edgestar unit gives you finer control. The main keyword edgestar kegerator temperature adjustment comes down to two approaches, and each suits a different kind of home bar.
| Criteria | Built-in Thermostat Dial | External Temperature Controller |
|---|---|---|
| Setup effort | Turn the dial and wait | Install probe and wire the controller |
| Temperature precision | Typically a few degrees of swing | Tighter control with a set differential |
| Multiple beer styles | Limited to one setting at a time | Easier to change targets quickly |
| Learning curve | Minimal | Moderate, requires basic wiring awareness |
| Best for | Single keg, steady room | Varied styles, fluctuating spaces |
Dial Adjustment Accuracy
The built-in dial on most Edgestar units is a mechanical thermostat with a rough scale rather than exact degree markings. Owners often report that the dial is a starting point, and they check the real temperature with a separate thermometer inside the cabinet. For a single lager at 38 to 40°F, this approach is adequate. Winner: the built-in dial, for simplicity.
Stability Across Room Temperatures
A kegerator in a garage that swings between 50°F and 85°F will drift from its setpoint more than one in a finished basement. External controllers that read a probe taped to the keg or placed in a sample jar of liquid respond to the beer itself, not the air. Winner: the external controller, especially in unheated or unconditioned spaces.
Changing Targets for Different Beers
Moving from a crisp pilsner at roughly 36°F to a stout served at 45°F means turning a dial and waiting several hours to see the result. An external controller lets you enter a new target and let the compressor respond. Winner: the external controller, for home bars with a rotating tap list.
Installation and Ongoing Care
The dial needs nothing beyond occasional cleaning of the cabinet interior and checking that the door gasket seals. An external controller adds a probe that must stay in position and a plug-in relay that must be kept dry. Mount the probe with its tip in a thermal well or taped firmly to the keg, and recheck it after moving the unit. Winner: the dial, for low maintenance.
Pros & Cons
Built-in Thermostat Dial
- Pro: No wiring or extra parts to manage.
- Pro: Works well for one keg held at a steady temperature.
- Con: Limited precision and slow to change between beer styles.
External Temperature Controller
- Pro: Tighter, more repeatable temperature control.
- Pro: Quick target changes for multiple beer styles.
- Con: Requires a probe installed correctly and some electrical comfort.
Which Should You Choose?
Choose the built-in dial if:
- You keep one or two kegs of similar style on tap.
- The kegerator sits in a climate-controlled room.
- You want to plug in and forget about it.
Choose an external controller if:
- You rotate styles that need different serving temperatures.
- The unit lives in a garage, basement, or other space with swings.
- You are comfortable mounting a probe and checking connections.
If you are weighing other models before committing, 6 Best Edgestar Dual Tap Kegerator Options for Home Bars (2026) covers the range of units and their typical setups. For a different controller approach, 5 Best Danby Kegerator Temperature Control Options for Home Bars (2026) shows how other brands handle the same problem. Readers building a larger system may also find Kegerator Co2 Pressure Chart: Set the Right PSI for Every Beer Style (2026) useful for matching pressure to temperature.
FAQ
Can I adjust the temperature on an Edgestar kegerator without a controller?
Yes. Most models include a manual thermostat dial. Set it, wait several hours, and check the actual temperature with an internal thermometer before adjusting again.
How accurate is the built-in dial compared with an external controller?
Owners often report that the dial holds a usable range but drifts more than a probe-based controller, particularly when room temperature changes. Measure with your own thermometer to confirm.
Do I need an electrician to install an external controller?
Most setups plug into a standard outlet, but if you are unsure about wiring or outlet ratings, consult a licensed electrician.
Conclusion
For a single beer held at steady room temperature, the built-in Edgestar dial is simple and dependable. If you pour several styles or keep the unit in a space with temperature swings, an external controller will serve you better. Match the method to how you actually use your bar, and you will spend less time adjusting and more time pouring.
