Updated November 2026
If you are asking what should CO2 pressure be on kegerator, the short answer is that most ales and lagers serve well between about 10 and 14 PSI at serving temperature, but the right number depends on beer style, temperature and line length. The regulator you choose determines how precisely you can hold that number. This list compares four CO2 regulators on the criteria that matter most at the keezer: gauge range, dual-gauge reading, pressure range, and how well they suit a standard CGA-320 tank.
Our top picks at a glance
- 1
TOP CHOICEBest overallFERRODAY CGA-320 Dual Gauge RegulatorView on Amazon - 2
Best for high-pressure tanksKegerator Regulator CGA-320 CO2 Gas Regulator with Relief ValveView on Amazon - 3
Best for two-product setupsTaprite T752HP Two Product Dual Pressure RegulatorView on Amazon - 4
Best for dual outputsDual Kegerator CO2 Regulator Gauge 0-60psiView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| FERRODAY CGA-320 Dual Gauge Regulator | Most home kegerators | Dual gauge, 0-60 PSI |
| CGA-320 High Pressure Regulator | Full-size tank users | 0-120 PSI range |
| Taprite T752HP Dual Pressure Regulator | Two-product systems | Two-product dual pressure |
| Dual Kegerator CO2 Regulator | Multi-tap setups | Dual outputs, 5/16″ line |
FERRODAY CGA-320 Dual Gauge Regulator
CGA-320 Kegerator Gas Regulator with 0-3000 PSI Tank Pressure, Dual-Stage Beer Keg Regulator with 2 Clamps & Gaskets Sealing FERRODAY Dual Gauge Co2 Regulator, 0-60PSI Beer Co2 Regulator for Kegerator
Best for: Most home kegerators that need a clear, readable pressure setting.
This regulator suits brewers who want to see both tank pressure and outlet pressure at a glance. Owners often report the 0-60 PSI outlet range covers typical serving pressures well.
Pros
- Dual gauges show tank and outlet pressure together
- Sealing washers and clamps are included
Cons
- Lower maximum range than high-pressure models
Kegerator Regulator CGA-320 CO2 Gas Regulator with Relief Valve
Kegerator Regulator CGA-320 CO2 Gas Regulator Co2 Tank Regulator with Relief Valve Sealing Washer for Beer, Soda Brewing 0-120 PSI Co2 Regulator for Kegerator, High Pressure Beer Keg Co2 Regulator
Best for: Brewers who want a wider pressure range and a relief valve.
Listed with a 0-120 PSI range and a relief valve, this model fits users who may also carbonate soda or work with higher-pressure tanks. It is a sensible step up for varied uses.
Pros
- Wide 0-120 PSI range
- Includes a relief valve and sealing washer
Cons
- Fine adjustment at low serving pressures takes patience
Taprite T752HP Two Product Dual Pressure Regulator
Best for: Two-product systems where each line may need a different pressure.
Taprite is a well-known name in draft equipment. This regulator suits a kegerator that serves a lager and a stout at different pressures from one tank.
Pros
- Two independent pressure outputs
- Established draft-industry brand
Cons
- Not the simplest choice for a single-tap setup
Dual Kegerator CO2 Regulator Gauge 0-60psi
Dual Kegerator CO2 Regulator Gauge 0-60psi CO2 Beer Pressure Regulator 0-3000psi CO2 Tank Regulator Fit ID 5/16" Gas Line Dual Output CO2 Regulator for Kegerator, CGA-320 Draft Beer Keg Regulator
Best for: Multi-tap kegerators with dual outputs.
Owners with more than one keg often value dual outputs and a 5/16″ gas line fitting. It is a practical choice for a busy home bar.
Pros
- Dual outputs for multiple kegs
- Standard 5/16″ gas line fitting
Cons
- Gauges are small and harder to read at a distance
Buying Guide
Gauge Range and Readability
Look for a regulator with an outlet gauge covering at least 0-60 PSI, since most serving pressures sit well below that. Dual gauges let you read tank pressure and serving pressure at once.
Tank Fitting
Most home CO2 tanks use a CGA-320 fitting. Confirm the thread type before you buy so the regulator seats properly. We also found 6 Best CO2 Pressures for Kegerator Settings Compared (2026) useful on this point.
Pressure Range and Adjustability
A wider range gives you room for different styles and occasional force-carbonation. Fine adjustment matters more than a high maximum when you are dialing in a single beer.
Line Fittings and Accessories
Check whether the regulator uses a 5/16″ barb, and whether washers and clamps are included. Matching fittings prevents leaks at the connection.
Good picks for this: FERRODAY CGA-320 Dual Gauge Regulator and Dual Kegerator CO2 Regulator
FAQ
What CO2 pressure should I use for a kegerator?
Many ales and lagers serve well between about 10 and 14 PSI at serving temperature. Set the number to match your beer style and line length.
Is a dual gauge regulator worth it?
A dual gauge lets you monitor tank pressure and outlet pressure together, which helps when you adjust carbonation.
Can one regulator serve more than one keg?
Dual-output regulators are designed for this, but each line still needs its own pressure setting for best results.
Conclusion
For most home kegerators, the FERRODAY dual gauge regulator offers the clearest readings. Brewers with several kegs should consider the dual-output model, while two-product setups suit the Taprite T752HP. Choose the regulator that matches your number of taps and your pressure needs.
Sources
- Compressed gas cylinder handling and safety guidance (osha.gov)
- Research-based background on fermentation and gas handling (extension.org)
